Figure 16 Isp Parameters: Pppoe Encapsulation; Table 12 Isp Parameters: Pppoe Encapsulation - ZyXEL Communications ZyWALL 2 Plus User Manual

Chapter 3 Wizard Setup

Figure 16 ISP Parameters: PPPoE Encapsulation

The following table describes the labels in this screen.

Table 12 ISP Parameters: PPPoE Encapsulation

LABEL
ISP Parameter
for Internet
Access
Encapsulation
Service Name
User Name
Password
Retype to
Confirm
Nailed-Up
Idle Timeout
WAN IP Address
Assignment
IP Address
Assignment
72
DESCRIPTION
Choose an encapsulation method from the pull-down list box. PPP over Ethernet
forms a dial-up connection.
Type the name of your service provider. This field is optional.
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Type your password again for confirmation.
Select Nailed-Up if you do not want the connection to time out.
Type the time in seconds that elapses before the router automatically disconnects
from the PPPoE server. The default time is 100 seconds.
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
ZyWALL 2 Plus User's Guide