Figure 301 Main Menu (Bridge Mode); Table 170 Main Menu Summary - ZyXEL Communications ZyWALL 2 Plus User Manual

Chapter 27 Introducing the SMT

Figure 301 Main Menu (Bridge Mode)

Getting Started
1. General Setup
7. Wireless Setup
The following table describes the fields in this menu.

Table 170 Main Menu Summary

NO
MENU TITLE
.
1 General Setup
2 WAN Setup
3 LAN Setup
4 Internet Access Setup
5 DMZ Setup
7 Wireless Setup
11 Remote Node Setup
12 Static Routing Setup
15 NAT Setup
21 Filter and Firewall
Setup
22 SNMP Configuration
23 System Password
24 System Maintenance
26 Schedule Setup
99 Exit
470
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
ZyWALL 2 Plus Main Menu
Enter Menu Selection Number:
FUNCTION
Use this menu to set up device mode, dynamic DNS and
administrative information.
Use this menu to clone a MAC address from a computer on your LAN
and configure the backup WAN dial-up connection.
Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP
settings.
Configure your Internet access setup (Internet address, gateway, login,
etc.) with this menu.
Use this menu to apply DMZ filters, and configure DHCP and TCP/IP
settings for the DMZ port.
Use this menu to configure WLAN DHCP and TCP/IP settings for the
wireless LAN interface.
Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
Configure IP static routes in this menu.
Use this menu to configure Network Address Translation.
Configure filters and activate/deactivate the firewall.
Use this menu to configure SNMP-related parameters.
Change your password in this menu (recommended).
From displaying system status to uploading firmware, this menu
provides comprehensive system maintenance.
Use this menu to schedule outgoing calls.
Use this menu to exit (necessary for remote configuration).
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
99. Exit
ZyWALL 2 Plus User's Guide