Wall-Mounting Instructions - ZyXEL Communications ZyWALL 2 Plus User Manual

Table 226 Ethernet Cable Pin Assignments
WAN / LAN ETHERNET CABLE PIN LAYOUT
1 IRD +
2 IRD -
3 OTD
+
6 OTD -

46.3 Wall-mounting Instructions

Complete the following steps to hang your ZyWALL on a wall.
See Table 221 on page 613
place them.
1 Select a position free of obstructions on a sturdy wall.
2 Drill two holes for the screws.
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the ZyWALL with the connection cables.
5 Align the holes on the back of the ZyWALL with the screws on the wall. Hang the
ZyWALL on the screws.
ZyWALL 2 Plus User's Guide
1 OTD 1 IRD +
+
2 OTD - 2 IRD -
3 IRD + 3 OTD +
6 IRD - 6 OTD -
for the size of screws to use and how far apart to
Chapter 46 Product Specifications
1 IRD +
2 IRD -
3 OTD
+
6 OTD -
617