Reference [Track Editing]; Editing A Range Of Data; Basic Editing Steps For Range Editing - Zoom MRS-802 Operation Manual

Reference [Track Editing]

Reference [Track Editing]
This section explains how to edit audio data contained on the tracks of the recorder section. There are two major types of editing
functions: specifying a range for editing, and editing an entire V-take.

Editing a range of data

The procedure for specifying a range of a V-take and then
performing an action such as copying or moving is
explained below.

Basic editing steps for range editing

When performing editing for a specified range of data, some
steps are similar for each action. These are as follows.
1.
From the main screen, press the [UTILITY] key in
the display section.
The utility menu appears on the display.
UTILITY UTILITY
TR EDIT TR EDIT
2.
Verify that the indication "UTILITY TR EDIT" is on
the display, and press the [ENTER] key.
The track edit menu containing various editing commands
appears on the display.
TR EDIT TR EDIT
Copy Copy
3.
Use the cursor left/right keys to select the desired
command.
The following editing commands are available.
• Copy
Copy a specified range of audio data.
• Move
Move a specified range of audio data.
• Erase
Erase a specified range of audio data.
• Trim
Retain only a specified range of audio data and erase the
rest.
46
• Fade I/O (Fade-in/out)
Perform fade-in/fade-out over a specified audio data
interval.
• Reverse
Reverse a specified range of audio data.
• TimStrch (Time Stretch/Compress)
Change the duration of a specified range of audio data on a
track without changing the pitch.
4.
Press the [ENTER] key.
The screen for selecting the track and V-take for editing
appears.
The display shown below is an example for selecting the
copy command in step 3.
Copy Src Copy Src
TR 1- 1 TR 1- 1
Track number
5.
Turn the dial to select the track number (1 - 8), and
use the cursor up/down keys to select the V-take
number (1 - 10).
Copy Src Copy Src
TR 8- 1 TR 8- 1
On this screen, also V-takes that are not currently selected
for tracks 1 - 8 can be selected for editing.
When track 8 is selected, turning the dial further to the right
brings up the following screen.
Copy Src Copy Src
TR 1/2 TR 1/2
When this screen is shown, turning the dial to the right
selects tracks in odd-numbered/even-numbered pairs (1/2,
3/4, 5/6, 7/8) or the master track. In this case, the currently
selected V-take for the two tracks or the master track
becomes the editing target.
6.
Press the [ENTER] key.
V-take number
ZOOM MRS-802