Dimensions And Weights; Service Clearance Recommendations; Service Clearance For Indoor Units - Trane CSAA Installation, Operation And Maintenance Manual

Dimensions and Weights

Service Clearance Recommendations

A minimum clearance of the section width plus 12 inches
on the access door side of the gas heat section is
recommended for routine maintenance. This clearance
provides enough room to replace the heat exchanger in
Figure 3. Service clearance for indoor units
CLCH-SVX07K-EN
Gas heat
Access
door
F
the event of failure. The section side panels must be
removed to access the heat exchanger. Refer to the
following figure for service clearance recommendations
for the air handler.
VFD
UV
lights
Fan
D
E
Filter mixing box
Coil
A
B
C
11