Pipe Cabinet Installation - Trane CSAA Installation, Operation And Maintenance Manual

Installation - Mechanical

Pipe Cabinet Installation

1. After air handler is completely installed and checked to
ensure that the unit is level and square, remove cross
base member on pipe cabinet base by removing the
four bolts and nuts.
Figure 45. Pipe cabinet installation, unit sizes 3 to 35 (des seq L or earlier) and 40 to 120
38
2. Add 1-inch x 7.5-inch Armacell
baserail and add 3/8-inch x 3/8-inch white Butyl
to face of pipe cabinet. See figures below for
appropriate sizes.
®
gasketing to inside of
®
tape
CLCH-SVX07K-EN