Trane CSAA Installation, Operation And Maintenance Manual page 57

Figure 79. Hood installation size 3-50 - front and back hoods for hurricane applications
Detail C
Support
bracket
Fasten bracket to bottom of
hood L angle (for hoods that
are lower to ground, may need
to flip the bracket (1) so the
short flange is pointing down
to the ground.
Figure 80. Hood installation size 57 - 120 for hurricane applications
CLCH-SVX07K-EN
1/4-14 x .75
sheet metal screw
See Detail D
Hood support bracket attachment
1/4-in. screws
These brackets
are attached to
See Detail C
the unit baserail.
L angle
Fasten ship-with angle
to support bracket
Hood straps
See Detail E for side hood
See Detail F for back/front hood
Hood support bracket
(use all brackets supplied,
qty varies by unit size)
Installation - Mechanical
Figure 81. Detail D
1/4 -14 x 0.75 in.
sheet metal screws
Figure 82. Detail E
Figure 83. Detail F
57