Setting Parameters - Denso HC36IITK-A Operation Manual

6. SETTING PARAMETERS

You may easily set parameters for communications conditions,
readable bar codes, transmission formats and others, by using
bar-coded parameter menus.
Settings made from the bar-coded parameter menus will be retained
even after the PC is turned off.
To scan bar codes given in those bar-coded parameter menus, press
the trigger switch.
Beeper Volume Adjustment
You may adjust the beeper volume to three levels--High, Medium, and
Low. The factory default is High.
Scanning the bar code below will cycle through the High, Medium,
and Low.
Adjust beeper volume
Other Parameters
Parameters other than the beeper volume may be set according to the
procedure given on the following pages.
6