4 ] System Environment Setting - Denso BHT-300B User Manual

[ 4 ] System Environment Setting

On the SYSTEM MENU, selecting "4: SET SYSTEM" calls up the
screen shown at left.
[1] EXECUTE PROGRAM:
[2] DISPLAY:
[3] DATE/TIME:
[4] BARCODE:
[5] COMMUNICATION:
[6] KEY:
[7] RESUME:
[8] DEFRAG:
[9] TCP/IP:
Select a desired item by using the numerical keys or F5 and F6 keys,
and the selected item becomes highlighted. Then press the ENT key.
Press the C key to return to the SYSTEM MENU.
53
Chapter 2 Getting Started the BHT and System Mode
Sets an auto-start execution program to
be run when the power is turned on.
Sets the message version (English or
Japanese).
Sets the calendar clock (date and time).
Sets the special barcode scanning
parameters
inverted label reading and the decoding
level) and the minimum number of digits
to be read for bar codes (ITF, STF and
Codabar).
Sets the communications environments
(interface port and communications
parameters).
Defines the functions of the shift key
and magic keys.
Sets the resume function.
Defragments the drive.
Sets the TCP/IP, FTP and DHCP
LAN-support software
(the black-and-white
(in
only).