Setup - Datavideo HS-3200 Instruction Manual

Load Ani Logo
Upon selecting "Load Ani Logo", the user can then choose the memory location from which
the animated logo is loaded. The system memory can store up to 999 logo animations.
Logo Preview is available below the "Load Ani Logo" row. "Thumbnail Logo – 1" allows the
user to preview the previous animated logo, "Thumbnail Logo" displays the logo animation
that will be loaded when "Load" is selected, and "Thumbnail Logo + 1" shows the next
animated logo.
Select "Load" to load the animated logo to the chosen destination (Logo 1/Logo 2).
Note: To import custom logo animations from your computer, see
Logo Animation for instructions.
To clear the loaded logo animation from the buffer, simply select "Clear Ani Logo."
To remove an animated logo from a memory location, first move to the memory location,
and select "Delete" then "Yes" to confirm the delete.
Positioning
The animated logo can be manually positioned by adjusting its XY coordinates. Note that the
origin of the coordinate system is at the center of the screen.
X: A positive value indicates that the animated logo is in the right half of the screen and a
negative value indicates that the animated logo is in the left half of the screen.
Y: A positive value indicates that the animated logo is in the top half of the screen and a
negative value indicates that the animated logo is in the bottom half of the screen.

4.10 Setup

In the "Setup" menu, the user can change the resolution, switch between full and simplified
menu versions, reset the HS-3200 to its Factory Default values, adjust the menu
preferences, enable/disable Auto Save, choose the preferred OSD menu language, upgrade
firmware and view the current firmware versions (Interface, Mainboard and Keyboard).
Advanced mode options
Setup Standard
Genlock
OutConv
Menu Mode
Menu Pref
Auto Save
Factory Def
Language
HS-3200
Addr Mode
IP Addr
1080p/59.94
Off
Off
Advanced
Blue
On
Restore
English
Network
s/w: v0.9.9.9
DHCP
192 168
Level Auto
H Phase 0 V Phase
Brightness 3
Transp 1 Position
Restr Names
Network Def
f/w: 2019-07-17
100
68
chapter 5.6 Enabling
Save Setup
Kbd: v1.7.3 OS: v1.0
101
0
Bot