Keyer; Position; Fine - Datavideo HS-3200 Instruction Manual

Border
Shade Matte Luma
Crop

Keyer

In this sub-option, the user will be allowed to select and configure the PIP window from the
list below. Please note that Keyers 1-4 are active for PIP configuration only if P-in-P is
selected in the Keyer sub-menu for the respective keyer.
 Key 1
 Key 2
 Key 3
 Key 4
 Flex PinP 1
 Flex PinP 2
 Flex PinP 3
 Flex PinP 4

Position

The user can adjust the P-in-P window position by adjusting values of X, Y and SIZE, where X
is the horizontal position, Y is the vertical position and Size is the PIP screen size.
X-Value Positive value: position the P-in-P window to the right.
Negative value: position the P-in-P window to the left.
Zero value: Position the P-in-P window at the center.
Y-Value Positive value: move the P-in-P window up.
Negative value: move the P-in-P window down.
Zero value: Position the P-in-P window at the center.
Size Ranges from 0 to 100 with 1% being the smallest and 100 being the largest. So
50% would represent a P-in-P window which is half the size of the background
image. 100% would see the PIP image totally cover the background image
unless offset to one side.

Fine

Once enabled, you will then be able to fine tune the position of the P-in-P window by
adjusting X and Y vales as well as the Size. This feature allows you to move the P-in-P
window more precisely to the desired location and adjust its size.
Normal
Luma 100% Sat
Width 2% Soft
100% Sat
Shade Soft 2% Shade Pos
Left 0% Right
Top 0% Bot
49
80% Hue
0% Opac 100%
80% Hue
50 Direction
0% Size
0% Soft
0
60
35
0%
0%