Main Adjust; Color; Information - Datavideo HS-3200 Instruction Manual

FACTORY RESET
EXIT

8.1 Main Adjust

The first menu option is the MAIN ADJUST.
To access the MAIN ADJUST sub-menu, press enter and the Brightness sub-option will be
highlighted.
To adjust BRIGHTNESS press Enter again. Use the Up / Down buttons to change the setting
and then press Enter to store the new value and return to the main menu.
Use the Up / Down buttons to select a different setting (Brightness, Contrast, Saturation,
Sharpness, TINT and etc). Follow the same procedure to set other values.

8.2 Color

Press the MENU button to access the menu and use the Up / Down buttons to move to the
COLOR option so that it is highlighted. Press the ENTER button to open the COLOR sub-
menu.
To access the selected color setting, press ENTER again.
Use the Up / Down buttons to navigate the available color settings.
 7500
 9300
 6500
 USER COLOR

8.3 Information

The System Information Menu displays Horizontal Frequency, Vertical Frequency,
Resolution and the monitor's version of firmware.
Once selected, the information will be displayed as follows:
 H. FREQUENCY
 V. FREQUENCY
 RESOLUTION
 VER.
4:3 MARK LINE
CENTRAL MARK
CINEMA ZONE MARK ON / OFF
EXIT
33.7KHZ
60.0HZ
1920X1080I
0.11
153
ON / OFF
ON / OFF