Tally Mode; Gpi Out; Audio - Datavideo HS-3200 Instruction Manual

Tally Mode

Tally output port generally sends two tally signals to each channel. In Datavideo products,
Red indicates On-Air, and Green indicates next video source. On the Multiview screen, the
tally light is indicated by rectangular borders around the input sub windows.
The HS-3200 provides two tally modes:
Normal: If in normal mode, tally lights of all video sources enabled on PGM view will be
turned ON (Red). These sources include PGM, PIP and Key sources. While transition is in
progress, tally lights of all video sources enabled on PGM view do not change color. The tally
light will only change color (Red  Green) after transition of PGM and PVW views is
complete. However, for video sources on the Preview window, the tally lights will be
enabled Green, and the color is changed to Red as soon as the transition is triggered.
Audio Mixer: If Audio Mixer mode is selected, tally lights of all video sources enabled on
PGM view will be turned ON (Red). While transition is in progress, tally lights of all video
sources enabled on PGM view do not change color. The tally light will only change color
(Red  Green) after transition of PGM and PVW views is complete. However, for video
sources on the Preview window, the tally lights will be enabled Green, and the color is
changed to Red as soon as the transition is triggered.

GPI Out

GPI is designed to allow the user to trigger playback of an external playback device such as
Datavideo's NVP-20 or HRS-30 unit. GPI OUT allows the user to configure your GPI
connection.
First enable the GPI port and then set the GPI mode, which is either level or pulse. The pulse
width can be configured in Width sub-option (1-9).
Once the GPI function is enabled, you can assign it to one of Inputs 1-12 which can later be
used to trigger external devices and the delay can be set to a value between 0 and 99.

4.8 Audio

In the Audio menu, you will be able to start and shut off the embedded audio of SDI and
HDMI videos.
Audio Audio
PGM Audio
Analog Out
Audio
External audio source can only enter the HS-3200 via the analog XLR input port found on the
rear panel of the main unit. Ideally the user should use the HS-3200 with an audio mixer.
Mode On Src
Mode V Fade Gain
Src Follow Gain
60
Input 1
0 dB Delay
0 dB Delay
0 ms
0 ms