Logo - Datavideo HS-3200 Instruction Manual

can also choose the frame at which the fade from PGM to PVW occurs.
The default is to do the fade in the middle of the clip but depending on the actual clip, the
user may want to alter this position.
 Start Frm: Adjusts the start frame number of the Clip
 End Frm: Adjusts the end frame number of the Clip
 Mid Frm: Adjusts the PGM to PVW fade point of the Clip
 Cancel: Cancels any changes
 Save: Saves the changes for this clip as each clip is allowed to have different settings.
Note: Clip Settings will be enabled only after the clip is loaded.
Loading the existing Clip for Stinger Transition Effect
The HS-3200 allows you to generate the stinger transition effect. To do this, the user should
load the clip saved on the machine first. Follow the steps outlined below to load the clip.
1. Press the MENU button to open the OSD menu on the Multiview display.
2. Open the Clip menu option as shown below.
Files File Type
Load Clip
3. In the Load Clip option, first select the clip that you would like to load. The Clip Preview
is shown in the row right below the Load Clip row.
4. Select Load to load the clip. The load progress prompt "Loading Clip XX/XX ..." will
appear on the Preview window. Once loaded to the clip buffer, the previously loaded
clip will be replaced.
Note: The load process can take up to tens of seconds.
5. To enable the Clip or Stinger transition mode, simply press the CLIP button.
For more information about Stinger transition (importing clip files to the switcher), see
Chapter 5.4 Performing a Stinger

Logo

Logo is a still image pre-loaded to the logo buffer (Logo 1/2). The Logo menu allows users to
load logo pictures from the machine's internal memory to the logo buffer, save logo pictures
to the machine's internal memory, view thumbnail logo pictures and adjust the logo
positions.
Advanced/Basic mode
Files File Type
Load Logo
Clip
Load
Thumbnail Clip - 1
Clear Clip
Transition.
Logo
Load
Thumbnail
Picture – 1
66
Clip 0
Thumbnail Clip
Logo 1
Thumbnail
Picture
Clip Settings
Thumbnail Clip + 1
Delete Clip
Logo 1
Thumbnail
Picture + 1