Wipe Selection Menu - Datavideo HS-3200 Instruction Manual

currently selected program video source. To set the transition time, open the OSD menu,
then the Start menu, and modify the FTB value accordingly.
T-Bar
This performs a manually controlled transition from the current program
source to the selected preset source. The selected transition wipe,
dissolve or animation will be used. When the T-Bar has travelled as far as
it can go, the transition between sources is complete. Please note that
the T-Bar can be operated bi-directionally.
The T-Bar has indicators next to it, which light when the transition is in
progress indicating the direction of operation and is off after the transition is complete.

WIPE Selection MENU

Start
Note: Open the OSD menu by pressing the MENU button in the MENU area of the HS-3200
Control Panel.
To select a WIPE on the OSD menu, navigate to the WIPE option under WIPE EFFECTS and
then select a WIPE number. Each WIPE transition also has flexible user options to tailor the
look of the transition. All wipes have an optional colour border applied. The wipe border
width and colour are also chosen within the menu system.
Soft Value
This value allows the 'inside' and 'outside' edge softness of the Wipe Border to be
controlled. A low value makes a sharp or hard wipe edge. A large value results in a softer or
diffused wipe edge.
There are 32 different 2D WIPE effects and 3
different 3D WIPE effects to choose from when
using the HS-3200 switcher. To select a different
WIPE transition, either select a WIPE style in the
TRANS EFFECT area of the HS-3200 Control Panel or
the Start Item of the OSD Menu (see the table
below). Before you make the selection, make sure
the TRANS BG and WIPE/DVE buttons are enabled.
Transition M/E
Type
Wipe Effects Wipe
Border Luma
Position X
Matte Luma
75
60 DSK
WIPE
1 Soft
100% Sat
0% Y
100% Sat
15 FTB 60
0% Width 1%
80% Hue 0
0%
80% Hue 0