On the command prompt (terminal on MAC OS), enter "arp -a" then press enter key to
display an ARP list. See if the NVS-31 is successfully connected to the network.
Execute services.msc,and on the right column of the "Services" window, locate "DHCP
Client" then click "Restart".
On the command prompt, enter ipconfig/flushdns followed by ipconfig/release and
ipconfig/renew.
7.2 Web User Interface
By now, we have obtained the IP addresses of the PC and the NVS-31. Enter the NVS-31's IP
address into the address bar of a browser then hit the ENTER button. Login by entering the
user name as well as the password into a pop-up dialogue box as shown below.
Status
You will see the Status page immediately after logging into the NVS-31 web UI. On the
Status page, you will be able to view the Operation Mode, Video Resolution, Stream
Settings (RTSP/RTMP(S)/HLS/SRT/TS), Record Settings, Record Media and Messages.
Username: admin
Password: 000000
Click OK to login. Once logged in, the
first page that appears will be the
Status page.
119