1.3 Control Panel Overview
Perform video switching and other relevant controls on the Control Panel.
User Memory Buttons
User Memory buttons 1/2 allow
the user to quickly recall and load
previously saved switcher
settings with a single button
press.
Press and hold the SHIFT button
and then press USER 1 or 2
button to switch to User Memory
3 or 4.
Frame Store
Press and hold the FS
button then press a
channel button on the
Preview row to switch
the selected channel to
a pre-loaded still
picture.
Program Row (PGM)
Selection of program
video source.
OSD Menu Control
Keyer Selection
Menu control buttons for
Enabling the pre-assigned
opening the OSD menu on
keyers (Chroma, Luma,
the monitor and navigating
Linear, DSK and PIP) on
through the OSD menu.
Program and Preset views.
Preview Row (PVW)
Selection of preview
video source.
Logos 1 & 2
Logo insertion on
preview and program
outputs once enabled.
T-Bar – Manual
Transition
Move the T-Bar up or
down to switch between
Preview and Program.
15
DSK Selection
Enabling DSK on preview
and program outputs.
Transition Effect
Selection
Selection of 2D and
3D transition effects.
Transition Type
Selection
Selection of Clip, MIX
or WIPE transition
effect.
FTB – Fade To Black
Fades the program
view to black once
pressed.
AUTO TAKE
CUT
Press to trigger
A hard cut between
automatic transition.
video sources.