Table of Contents
Advertisement
7.1 Main Adjust
The first menu option is the MAIN ADJUST.
To access the MAIN ADJUST sub-menu, press enter and the Brightness sub-option will be highlighted.
To adjust BRIGHTNESS press Enter again. Use the Up / Down buttons to change the setting and then press
Enter to store the new value and return to the main menu.
Use the Up / Down buttons to select a different setting (Brightness, Contrast, Saturation, Sharpness, TINT
and etc). Follow the same procedure to set other values.
7.2 Color
Press the MENU button to access the menu and use the Up / Down buttons to move to the COLOR
option so that it is highlighted. Press the ENTER button to open the COLOR sub-menu.
To access the selected color setting, press ENTER again.
Use the Up / Down buttons to navigate the available color settings.
You can choose:
7.3 Information
The System Information Menu displays Horizontal Frequency, Vertical Frequency, Resolution and the
monitor's version of firmware.
Once selected, the information will be displayed as follows:
You will see:
H. FREQUENCY
V. FREQUENCY
RESOLUTION
VER.
7.4 Special Function
The Special Function Sub-Menu has settings for the OSD TIMEOUT, Frame Ratio, 4:3 MARK LINE, Central
Mark, and Cinema Zone Mark.
To access the selected setting press the ENTER button.
Use the Up / Down buttons to navigate the available options.
You can choose:
OSD TIMEOUT
FRAME RATIO
4:3 MARK LINE
CENTRAL MARK
CINEMA ZONE MARK
7500
9300
6500
USER COLOR
33.7KHZ
60.0HZ
1920X1080I
0.11
5-120 SEC
90 / 80 / 0FF
ON / OFF
ON / OFF
ON / OFF
77
Advertisement
Table of Contents
