Figure 19: Hard Drive Handle Down; Figure 20: Drive Partially Removed - Juniper IDP 600 Series Installer's Manual

IDP 50, 200, 600, 1100 Installer's Guide
40
Removing and Installing a SCSI Hard Drive (IDP 600 and 1100 Only)

Figure 19: Hard Drive Handle Down

5. Pull the handle down to the horizontal position. This action unlatches the drive
and levers it part way out of the bay.

Figure 20: Drive Partially Removed

6. Pull the handle to slide the drive out of the bay. When the drive is partially
visible, use a second hand to hold the drive from underneath.
7. Using both hands, remove the drive completely from the bay.