Figure 15: Power Supply Handles In Open And Closed Positions - Juniper IDP 600 Series Installer's Manual

IDP 50, 200, 600, 1100 Installer's Guide
36
Removing and Installing a Power Supply (IDP 200, 600, and 1100 Only)

Figure 15: Power Supply Handles in Open and Closed Positions

3. On the power supply or blank you want to remove, rotate the curved handle to
the open (extended) position.
4. Grasp the extended handle with one hand.
5. In the upper left corner of the power supply or blank is a red lever. Push it to the
right to unlatch it.