Table of Contents
Advertisement
Chapter 3
Installing the Sensor
General Installation Guidelines
NOTE:
This chapter describes how to install the IDP Sensor in an equipment rack and how
to connect the device in a network environment.
General Installation Guidelines
Rack Mounting the IDP Sensor on page 16
Connecting Power on page 18
Connecting Management Ports on page 19
Observing the following precautions can prevent injuries, equipment failures, and
shutdowns.
WARNING:
Never assume that the power supply is disconnected from a power
source. Always check first.
Room temperature might not be sufficient to keep equipment at
CAUTION:
acceptable temperatures without an additional circulation system. Ensure that
the room in which you operate the IDP Sensor has adequate air circulation.
Do not work alone if potentially hazardous conditions exist.
Look carefully for possible hazards in your work area, such as moist floors,
ungrounded power extension cables, frayed power cords, and missing safety
grounds.
Although you can place the IDP Sensor on a desktop for operation, Juniper
Networks does not recommend deploying it in this manner.
CAUTION:
To prevent abuse and intrusion by unauthorized personnel, it is
extremely important to install the IDP Sensor in a locked-room environment.
General Installation Guidelines
15
Advertisement
Table of Contents
