Sun Solaris Packages; Installing The Management Server - Juniper IDP 600 Series Installer's Manual

Sun Solaris Packages

Installing the Management Server

1. Insert the IDP Management Server and User Interface Installation CD into the
2. Log in to the server as a trusted user account and switch to the
The Management Server installation process is case-sensitive. You must follow the
NOTE:
menu selections exactly as shown in the script help text.
3. Create an
4. Mount the IDP Installation CD following the operating system manufacturer's
5. Change to the Management Server directory using the
6. Run the Management Server install script by typing the appropriate command:
7. When prompted, specify the directory that IDP uses to store the Management
8. When prompted, specify a User Interface Admin password.
GZIP – Compression Package - For Solaris systems, you can download the gzip
package for your processor and OS version from http://www.sunfreeware.com.
Once you have downloaded the gzip package (do not download the source code
file), install the software with the pkgadd command. Example:
gzip-1.3.5-sol8-sparc-local
uudecode — This is installed by default on Solaris systems.
CD-ROM drive on the server.
user and
idp idp
The IDP Management Server requires a dedicated user account and user group.
For Red Hat Linux, type the command:
useradd idp
For Solaris, type the commands:
groupadd idp
useradd -g idp idp
instructions.
For Linux:
cd /mnt/cdrom/Mgt-Svr/Linux
For Solaris:
cd /cdrom/cdrom0/Mgt-Svr/Solaris
For Linux:
./mgtsvr_linux_3_1.sh
For Solaris:
./mgtsvr_solaris_3_1.sh
The installation automatically begins.
Server data files. This directory should be in a different partition than the
operating system.
Chapter 5: Installing the IDP Management Server Software
.
user group.
Installing the Management Server
pkgadd -d
account.
root
command.
cd
29