Hard Drives And Cd-Rom Drives; Power Supplies; Led Definitions; System Status Leds - Juniper IDP 600 Series Installer's Manual

IDP 50, 200, 600, 1100 Installer's Guide

Hard Drives and CD-ROM Drives

Power Supplies

LED Definitions

System Status LEDs

6
LED Definitions
Management Port (MGT)
The Management port provides access, via 10/100/1000 Mbps Ethernet, to the
Sensor. The Appliance Configuration Manager (ACM) is accessed via the
Management Port (https://<Sensor_IP_Address>.

Table 3: IDP Sensor Drives

IDP Sensor
50
200
600 and 1100

Table 4: IDP Sensor Power Supplies

IDP Sensor
50
200
600 and 1100
This section describes the LEDs for the following IDP Sensor components:
System status
Management and High Availability port
Traffic port
Disk drive, CD-ROM drive, and power supply (back panel)
The IDP 50 Sensor has three system status lights on the front panel: PWR, HD, and
OVERHEAT.
Hard Drives and CD-ROM Drives
1 CD-ROM drive
1 internal hard drive
1 CD-ROM drive
1 internal hard drive
1 CD-ROM drive
2 externally accessible hot-swappable SCSI RAID
1 mirrored hard drives
Power Supplies
1 fixed power supply
1 removable power supply
Empty bay for second, optional power supply
2 removable hot-swappable power supplies