Free Assignment Of D Numbers: Determine T Number To The Specified D Number (Getacttd) - Siemens SINUMERIK 840D sl Programming Manual

7.7.4 Free assignment of D numbers: Determine T number to the specified D number
(GETACTTD)
Function
You determine the T number associated with an absolute D number using the GETACTTD
command. There is not check for uniqueness. If several D numbers within a TO unit are the
same, the T number of the first tool found in the search is returned. This command is not
suitable for use with "flat" D numbers, because the value "1" is always returned in this case
(no T numbers in database).
Syntax
status=GETACTTD(Tnr,Dnr)
Significance
Dno
Tno
status
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
7.7 Free assignment of D numbers, cutting edge numbers
D number for which the T number shall be searched.
T number found
Value: Significance:
0 The T number has been found. Tno contains the value of the T
number.
-1 No T number exists for the specified D number; Tno=0.
-2 The D number is not absolute. Tno receives the value of the first
found tool, that contains the D number with the value Dno.
-5 The function was not able to be executed for another reason.
Tool offsets
501