Siemens SINUMERIK 840D sl Programming Manual page 473

Supplementary conditions
● G450/G451 and DISC
Example
Program code
N10 A0 B0 X0 Y0 Z0 F5000
N20 T1 D1
N30 TRAORI(1)
N40 CUT3DC
N50 G42 X10 Y10
N60 X60
N70 ...
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
A circular block is always inserted at out corners. G450/G451 have no significance.
The DISC command is not evaluated.
7.5 Activate 3D tool offsets (CUT3DC..., CUT3DF...)
Comments
; Tool call, call tool offset values.
; Transformation selection
; 3D tool radius compensation selection
; Tool radius compensation selection
Tool offsets
473