Juniper SRX5400 Manual page 72

If a slot in the SRX5400, SRX5600, or SRX5800 Services Gateway card cage is not occupied by a card,
you must install a blank panel to shield the empty slot and to allow cooling air to circulate properly through
the services gateway.
Description
Software release
Supported Slots
Cables and connectors
Power requirements
Weight
Fixed-configuration IOC with 10-Gbps, 40-Gbps, and
100-Gbps port speeds
Maximum throughput: up to 480 Gbps (240 Gbps per
PIC slot)
Maximum configurable MTU: 9192 bytes
Junos OS Release 19.3R1 and later
SRX5400—Any slot, except the bottom slots 0 and 1/0,
which are reserved for SCB/RE.
NOTE: Slot 1/0 is a dual purpose slot. You can install
SRX5K-IOC4-10G in slot 2/6 if an SCB is not already
installed in it.
SRX5600—Any slot, except the bottom slots 0 and 1,
which are reserved for SCB/RE.
SRX5800—Any slot, except the middle slots 0, 1, and
2/6, which are reserved for SCB/RE, and slots 0 (most
left) and 11 (most right).
NOTE: Slot 2/6 is a dual purpose slot. You can install
SRX5K-IOC4-10G in slot 2/6 if an SCB is not already
installed in it.
See Hardware Compatibility Tool
supported.
At different temperatures:
131° F (55° C): 500 W
104° F (40° C): 465 W
75° F (25° C): 430 W
15.7 lb (7.12 kg)
for the transceivers
64