Cards Supported On Srx5400, Srx5600, And Srx5800 Services Gateways - Juniper SRX5400 Manual

Although the following modules are not cards in the sense of having a form-factor that fits the card cage
of the SRX5400, SRX5600, and SRX5800 Services Gateway, this guide also addresses the following modules
that fit into certain SRX5400, SRX5600, and SRX5800 Services Gateway cards:
Routing Engines fit into slots in SCBs and maintain the routing tables, manage the routing protocols used
on the device, control the device interfaces and some chassis components, and provide the interface
for system management and user access to the device.
Port modules fit into slots in Flex IOCs and add additional physical network interface ports to the services
gateway.
Modular Interface Cards (MICs) fit into slots in MPCs and add additional physical network interface ports
to the services gateway. MPCs and MICs are similar in form and function to Flex IOCs and port modules.
However, the two use different form-factors, so you cannot install port modules in an MPC, nor can you
install MICs in a Flex IOC.

Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways

Table 3 on page 4 describes the cards and other modules supported on the SRX5400, SRX5600, and
SRX5800 Services Gateways.
Table 3: Supported Cards for SRX5400, SRX5600, and SRX5800 Services Gateways
Card Name and Model
Number
SPCs
Services Processing Card
SRX5K-SPC-2-10-40
Specifications
Services Processing Card
SRX5K-SPC-4-15-320
Specifications
Services Processing Card
SRX5K-SPC3 Specifications
Interface Cards
Earliest Supported Junos OS Release
SRX5400
Not supported
12.1X46-D10
18.2R1-S1
SRX5600 and SRX5800
9.2
12.1X44-D10
18.2R1-S1
Last Supported Junos
OS Release
SRX5400, SRX5600,
and SRX5800
15.1X49
4