Srx5K-Scb3 Leds - Juniper SRX5400 Manual

Controls
Supported slots
Power requirement
Weight
Serial number location

SRX5K-SCB3 LEDs

Table 5 on page 73 describes the SCB3 LEDs and their states.
Table 5: SRX5K-SCB3 LEDs
Label Color
FABRIC ACTIVE Green
OK/FAIL Green
Red
–
LINK Green
–
None
SRX5400–Only bottom slots 0 and 1/0
SRX5600–Only bottom slots 0 and 1
SRX5800–Only center slots 0, 1, and 2/6
300 W
9.6 lb (4.4 kg) with Routing Engine
The serial number label is located as shown in
Figure 41: SRX5K-SCB3 Serial Number Label
State
On steadily
On steadily
On steadily
Off
On steadily
Off
Figure 41 on page
Description
Fabric is in active mode.
SCB3 is online.
SCB3 has failed.
SCB3 is offline.
Port is enabled and link is established.
Port is disabled or no link is established.
73
73.