Juniper SRX5400 Manual page 98

CHAPTER 8
Handling and Storing SRX5400, SRX5600, and
SRX5800 Services Gateway Cards
IN THIS CHAPTER
SRX5400, SRX5600, and SRX5800 Services Gateway Card Terminology | 91
Handling an SRX5400, SRX5600, or SRX5800 Services Gateway Card | 92
Storing an SRX5600, SRX5600, or SRX5800 Services Gateway Card | 94
SRX5400, SRX5600, and SRX5800 Services Gateway Card Terminology
Regardless of orientation, this information uses the same terms for all four edges of the card (see
Figure 48 on page 92):
Faceplate—Edge of the card that has connectors to which you connect cables or sockets in which you
insert SFP or XFP transceivers.
Connector edge—Edge opposite the faceplate; this edge has the connectors that attach to the midplane.
Top edge—Edge at the top of the card when it is vertical.
Bottom edge—Edge at the bottom of the card when it is vertical.
NOTE: This terminology applies to SPCs, IOCs, MPCs, and SCBs in addition to Routing Engines
and port modules.
91