About The Documentation; Documentation And Release Notes; Using The Examples In This Manual - Juniper SRX5400 Manual

About the Documentation

IN THIS SECTION
Documentation and Release Notes | vii
Using the Examples in This Manual | vii
Documentation Conventions | ix
Documentation Feedback | xii
Requesting Technical Support | xii

Documentation and Release Notes

To obtain the most current version of all Juniper Networks
documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the documentation, follow the
product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.
These books go beyond the technical documentation to explore the nuances of network architecture,
deployment, and administration. The current list can be viewed at https://www.juniper.net/books.

Using the Examples in This Manual

If you want to use the examples in this manual, you can use the load merge or the load merge relative
command. These commands cause the software to merge the incoming configuration into the current
candidate configuration. The example does not become active until you commit the candidate configuration.
If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example
is a full example. In this case, use the load merge command.
If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In
this case, use the load merge relative command. These procedures are described in the following sections.
®
technical documentation, see the product
vii