Figure 5-14 Configuring The Front-End Functions - Siemens Add 7 AddFEM Manual

AddFEM
Configuring the Front–end Functions:
Figure 5-14 Configuring the front–end functions
Only for 6DL3100–8AB:
This parameter specifies the functionality of the AddFEM. Fixed but configurable
front–end functions (FEF), for example positioners for gas or steam turbines, can
be specified. At 6DL3100–8AC the AddFEM operates as a modular slave. The
FEF is installed in the AddFEM as an additional module during the configuration.
AddFEM
C79000–G8076–C900–03
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Commissioning / Operation / Maintenance
5-33