Installation Guidelines And Installing The Module; Front Panel − Access To All Functions - Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual

1.6 Front Panel − Access to all Functions
Connection, Display and Control Elements
On the front panel, you have access to all the connection, display and control
elements of the IE/AS-i LINK module.
LED "LINK" 1
connection to
Ethernet partner
LAN connector
X1
(independent
switch port)
LED "RX/TX" 1
data traffic with
Ethernet partner
LED "LINK" 2
connection to
Ethernet partner
LAN connector
X2
(independent
switch port)
LED "RX/TX" 2
data traffic with
Ethernet partner
X = placeholder
for hardware
version
Firmware version
Power supply
connector 24 V DC
(as alternative to
supply over line 1)
Figure 1-2 Front View of the
IE/AS−INTERFACE LINK PN IO
Release 08/2018
C79000−G8976−C216−03
1 Technical Description, Installation Guidelines, Operation
Display
Release catch
for
DIN rail mounting
(bottom of device)
IE/AS-INTERFACE LINK PN IO
as of hardware version 1, as of firmware version V2.0
C-PLUG
(optional)
LEDs
IE/AS-i LINK
SF = system fault
BF = bus fault
ON = power
LEDs
AS-i line
SF = system fault AS-i
APF = AS-i power fail
CER = configuration error
AUP = autoprog available
CM = configuration mode
ON = AS-i online
AS-i line 1
connector
Keypad
for
− AS-i configuration
− Link configuration
− Diagnostics
AS-i line 2
connector
(only with
double master)
19