Figure 5-13 Configuring The Delayed Disconnection - Siemens Add 7 AddFEM Manual

Commissioning / Operation / Maintenance
Configuring the Delayed Disconnection:
Figure 5-13 Configuring the delayed disconnection
Brief processing gaps in the automation processor – such as they occur when red-
undant APs are updated – can be bridged by the AddFEM. "Hard" disconnection of
the outputs is not carried out until the set tolerance time has expired.
5-32
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
AddFEM
AddFEM
C79000–G8076–C900–03