Siemens Add 7 AddFEM Manual page 5

Safety Guidelines This document contains information which you have to observe for your personal sa-
fety as well as in order to avoid damage to property. The information on your personal
safety are highlighted by a warning triangle. Information on general damage to property
do not have a warning triangle. Depending on the degree of danger they are indicated
as follows:
Danger
!
Means that death, serious injury or considerable damage to property will result if the
corresponding precautionary measures are not taken.
Warning
!
Means that death or serious injury can result if the corresponding precautionary mea-
sures are not taken.
Caution
!
With warning triangle means that minor injury can result if the corresponding precautio-
nary measures are not taken.
Caution
Without warning triangle means that damage to property can result if the correspon-
ding precautionary measures are not taken.
Notice
Means that undesired results or states can occur if the corresponding information is
not observed.
Qualified Personnel Commissioning and operation of a device may only be carried out by qualified per-
sonnel. Qualified personnel in the sense of the safety instructions in this manual are
persons who are entitled to commission, ground and identify devices, systems and
circuits in accordance with the standards of safety technology.
Normal Use Please note the following:
Warning
The device may only be used for the applications described in the catalog and in the
technical description and only in connection with devices or components from other
!
manufacturers which have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transport,ed, stored, set up
and installed correctly and operated and maintained as recommended.
Trademarks TELEPERMR, SIMATICR and SIMATIC NETR are trademarks of Siemens AG. The
remaining designation in this document can be trademarks whose use by third parties
for their purposes may violate the rights of the holder.
Copyright E Siemens AG 2003 All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design, are
reserved.
Siemens AG
Automation & Drives Group
Systems Engineering
D-76181 Karlsruhe
Siemens Aktiengesellschaft
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Exclusion of liability
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be pre-
cluded entirely, we cannot guaranteefull agreement. However, the
data in the manual are reviewed regularly and any necessary correc-
tions included in subsequent editions. Suggestions for improvement
are welcomed.
E Siemens AG 2003
Subject to change without prior notice
Order No. C79000–G8076–C900