Physical Description; Mcias 1610 Front View - Motorola McIAS 1610 Series System Manual

Depending on the type of SBC board installed in your system (boards are described
in Section 1.3.1), refer to either the McIAS 16xx/68 Series System Operation Manual
(Part Number 41318300) or the McIAS 16xx/IP Series System Operation Manual (Part
Number 41318310) for information about system start-up and system administration.
Refer to the McIAS Telephony Interface Boards and Trunk Connections Manual (Part
Number 41315000) for information on connecting the telephony interface boards
from McIAS to the telco trunks.
1.3

Physical Description

McIAS 1610 is a rack mount unit that is easily installed in a standard telco rack. The
interior of the unit includes a card file with five slots, a hard disk drive, a cartridge
disk drive, a fan and a filter. Refer to Figure 1-1 below for a front view of the system.
The standard unit is 17 inches wide, 5.25 inches high and 12 inches deep. The 17"
McIAS 1610 Assembly is delivered with two mounting brackets attached which adapt
it to 19 inches for rack mounting.
Optional mounting brackets may be attached to the front of the unit to adapt it to 21,
23, 25 or 26 inch racks. Refer to Table 1-1 for information on the system dimensions
and characteristics.
POWER SUPPLY BOARD
SBC / ALARM TRANSITION BOARD
Figure 1-1

McIAS 1610 Front View

McTi Board 3
McTi Board 2
McTi Board 1
2
(Slot 1)
(Slot 2)
(Slot 3)
(Slot 4)
(Slot 5)