105Mb Drive Operation Instructions - Motorola McIAS 1610 Series System Manual

Table of Contents

Normal

Eject

Button

WARNING !

THE EMERGENCY EJECT HOLE SHOULD ONLY BE USED TO EJECT THE

CARTRIDGE WHEN POWER IS TURNED OFF.

CAN OCCUR IF THE CARTRIDGE IS REMOVED WHILE IT IS STILL SPINNING.

INSTRUCTIONS BEFORE ATTEMPTING TO USE THIS FEATURE.

105MB

How to Insert a Removable Cartridge into the Drive

1. Hold the cartridge so the silver cartridge head access door faces the drive and the

Cognitronics label is up so you can read it. Insert the cartridge into the removable

cartridge drive so that the cartridge is flush with the front of the drive. The load

lever will pop out slightly.

2. Push the lever firmly in the opposite direction, holding it until it locks in place and

the drive's LED begins to flash.

3. When the cartridge is properly inserted, the drive's LED will turn green after a few

seconds.

How to Remove a Cartridge from the Drive

1. Press the eject button on the drive.

2. The drive's LED will blink for several seconds after which the lever partially

releases. Push the lever firmly in the opposite direction until the cartridge ejects.

3. Remove the cartridge, place it in its protective case and store it in a secure

location, away from magnetic fields.