Table of Contents
Advertisement
Functional Description
Feature
Interrupts
3
Serial I/O
Parallel I/O
Ethernet I/O
PCI interface
Keyboard/mouse
interface
Floppy disk
controller
CompactPCI
USB I/O
EIDE
HSC Interface
General Description
3-2
Table 3-1. MCP750HA Features (Continued)
Description
Software interrupt handling via Raven (PCI-MPU bridge) and Peripheral Bus
Controller
1 async port (COM1) via front panel. 2 async ports, 2 sync/async ports via the
transition module
IEEE 1284 bidirectional parallel port (PC87307 SIO) via the transition
module
10BaseT/100BaseTX connection via the front panel
One IEEE P1386.1 PCI Mezzanine Card (PMC) slot; one 110 pin
CompactPCI connector (J4) for PCI expansion/Hot Swap bridge.
Support for keyboard and mouse input (PC87307 SIO) via the transition
module
Support for floppy disk drive (PC87307 SIO) via the transition module
33 MHz, 64-bit CompactPCI interface with DEC 21154 PCI-to-PCI bridge.
USB Host/Hub interface with two ports routed to the front panel or transition
module
Primary EIDE port routed to onboard Compact FLASH connector. Secondary
EIDE port routed to the transition module
Interface to the Hot Swap Controller (J3)
The MCP750HA is a single-slot single-board computer equipped with an
MPC750 PowerPC™ 750 Series microprocessor. The processor
implements a backside cache controller and the board comes with 1MB of
cache memory.
The MCP750HA is a hot swap capable single-slot single board computer.
It is designed to be used with an HSC8216 Bridge Module in an N+1 Hi-
Availability environment. The MCP750HA/HSC complement allow for
hot swap capability of processor and CPCI Hot Swap compliant I/O
modules.
Computer Group Literature Center Web Site
Advertisement
Table of Contents
