Fixed Component Removal And Installation Procedures; Fan Assembly; Disk Drives - Motorola McIAS 1610 Series System Manual

1.5 Fixed Component Removal and Installation Procedures

1.5.1 Fan Assembly

The fan assembly is easily detached by removing the single screw on its front and
sliding the fan unit straight out from the front of the McIAS. To install, reverse the
procedure.
The fan filter is located along the right side of the assembly and also slides straight
out. When installing a new filter, be sure that the pull tab is pointing toward the
center of the unit.

1.5.2 Disk Drives

The disk drives are mounted on a removable assembly which is located to the left of
the card file. This facilitates removal of the drives whenever necessary.
To remove the drive assembly from a powered down unit:
1. Loosen the two screws on the front of the plate.
2. Pull the drive assembly straight out on the slides.
To install, reverse the procedure.
6