2.3.2 McIAS 1610 Digital Connectors
McIAS 1610 pin connections pertain to the channels coming from the McTi board(s)
installed in Slots 4, 3 and 2. Slot 4 corresponds to digital connector J8, Slot 3
corresponds to J9 and Slot 2 corresponds to J10. For installations that are
exclusively configured with digital McTi boards, channels would be distributed as
follows:
Note: If a connector block is used, refer to Table 2-4; if a connector block is not
used, refer to Table 2-1.
McTi-24:
J8 (board in Slot 4)
J9 (board in Slot 3)
J10 (board in Slot 2)
McTi-30:
J8 (board in Slot 4)
J9 (board in Slot 3)
J10 (board in Slot 2)
POWER SUPPLY BOARD
SBC / ALARM TRANSITION BOARD
McIAS 1610 Front View
McIAS 1610 Rear View
= Channels 1-24
= Channels 25-48
= Channels 49-72
= Channels 1-30
= Channels 31-60
= Channels 61-90
McTi Board 3
McTi Board 2
McTi Board 1
7
(Slot 1)
(Slot 2)
(Slot 3)
(Slot 4)
(Slot 5)