Data & Voice Storage Devices - Motorola McIAS 1610 Series System Manual

Telephony Interface Boards
Refer to the McIAS Telephony Interface Boards and Trunk Connections Manual (Part
Number 41315000) for detailed information on the four types of telephony interface
boards supported by McIAS 1610.
Power Supply Board
The Power Supply board (P/N 44303220) is housed in Slot 1, the uppermost slot in
the card file. The outside panel of this board consists of several LEDs and the
system's ON/OFF switch. The LEDs indicate the status of the input power and output
power. FRAME BATTERY lights green and refers to the main -48 volt input power.
SIGNAL BATTERY lights green and refers to the separate signal -48 volt power. The
remaining three LEDs all light green and refer to the output power from the power
supply that is used to drive the rest of the system (-12v, +12v and +5v).
1.3.2 Data & Voice Storage Devices
Two storage devices are installed in McIAS 1610. One device is a fixed hard disk and
is used for system and application data and voice storage; the other device is a
removable cartridge hard disk used for backing up data and voice files as well as for
importing software and new voice files. Depending on the configuration, these drives
vary in capacity.
As illustrated in Figure 1-1, the two disk drives are mounted vertically on the wall to
the left of the card file.
6