Assigning The User Define Button; Assigning The User Define Button - Yamaha DME32 Owner's Manual

86
Chapter 7—Other DME Designer Functions
Assigning the User Define Button
The front panel [USER DEFINE] button can provide direct access to a specific param-
eter. Different user define settings can be stored in each scene.
Choose User Define Button from the Tool menu.
1
The User Define Button window opens, as shown below.
The User Define Button parameters are explained in the following table.
Section
Unit
Assign
1. Components in the current configuration can be selected.
2. Depends on the selected component.
Make the required settings and then click Apply to apply your settings and
2
leave the User Define Button window open, click OK to apply your settings
and close the window, or click Cancel to leave the settings unchanged and
close the window.
Use the Offline Edit window to save your settings to a scene.
3
The User Define Button window closes.
Using the Apply button instead of the OK button is convenient when working offline,
as it allows you to edit and view user define button settings for each scene without hav-
ing to keep opening and closing the User Define Button window.
You must compile and transfer the configuration to the DME32 for the User Define
Button settings to take effect. See "How to Build & Edit Configurations" on page 44 for
more information.
For information on using the [USER DEFINE] button, see "Editing Parameters & the
User Define Button" on page 201.
DME32—Owner's Manual
Parameter Range
1–4
Componen
1
t
2
Parameter
Up to 15
LCD Disp
characters
Description
Selects the DME32 whose [USER DEFINE] button is
to be assigned
Selects the component whose parameter is to be
assigned
Selects the parameter to be assigned
The text that appears on the DME32 display when
its [USER DEFINE] button is pressed