Stereo Delay - Yamaha DME32 Owner's Manual

Stereo Delay

The Stereo Delay component offers a two-channel delay with independent delay and
feedback controls for each channel.
The Stereo Delay control window consists of delay controls, input level meters, and out-
put level meters.
The IN meters display the input signal levels, while the OUT meters display the output
signal levels.
Parameter Range
DELAY L 0.0–1350.0 ms
FB.G L –99 to +99%
DELAY R 0.0–1350.0 ms
FB.G R –99 to +99%
HI.RATIO 0.1–1.0
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency (THRU = filter off)
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency (THRU = filter off)
The Stereo Delay component features two inputs and
two outputs.
Left-channel delay time
Left-channel feedback
(plus values for normal-phase feedback, minus
values for reverse-phase feedback)
Right-channel delay time
Right-channel feedback
(plus values for normal-phase feedback, minus
values for reverse-phase feedback)
High-frequency feedback ratio
Effect
Description
DME32—Owner's Manual
147