Yamaha DME32 Owner's Manual page 191

186
Chapter 9—Component Guide Part II
Section
ORBIT
SUB
WOOFER
SOUND
IMAGE
POSITION
When the CSR (center-side ratio) control is set to 0, the front-center signal is fed only
to the L and R outputs. When it's set to 0.5, the front-center signal is fed equally to the
L, R, and C outputs. And when it's set to 1.0, the front-center signal is fed only to the C
output.
DME32—Owner's Manual
The sound image can be moved directly to a position by clicking within the sur-
round pan graph, or directly to one of the six buttons along the front and rear
edges of the graph. Buttons with speaker icons represent the components out-
puts.
Parameter
Orbit See page 180 for infor-
buttons mation on the orbits
WIDTH 0–63/L63–C–R63
X OFFSET L63–C–R63
DEPTH 0–63/F63–C–R63
Y OFFSET F63–C–R63
CSR 0.0–1.0
Level –Inf dB to 6.0 dB
SPEED 0–10
Range
Selects an orbit for sound-image
movement
Adjusts the width of the orbit
Adjusts the X (left-right) position of
the orbit
Adjusts the depth of the orbit
Adjusts the Y (front-rear) position of
the orbit
Adjusts the amount of front-center
signal fed to the L, R, and C outputs.
Adjusts the level of the subwoofer
signal
Sets the continuous movement
speed
Description