Working With Multiple-Unit Configurations; Working With Multiple-Unit Configurations - Yamaha DME32 Owner's Manual

58
Chapter 5—Building Configurations
Working with Multiple-Unit Configurations
When building and editing multiple-unit systems, use the scroll bars to access each sec-
tion of the configuration window. Sections can be resized as required. See "Resizing
Sections of the Configuration Window" on page 59 for more information.
Components for each DME32 are placed in the corresponding section of the configu-
ration window. Components cannot be placed on boundary lines nor can they be
dragged between sections. When a component is moved from one section to another,
the corresponding DSP power meters adjust accordingly.
The following example shows a configuration window with two DME32s.
Signals can be distributed among DME32s by using the Cascade components. See "Cas-
cade" on page 92 for more information.
DME32—Owner's Manual