Yamaha DME32 Owner's Manual page 113

3-Way Processor
The 3-Way Processor component splits the input signal into three frequency chan-
nels—high, mid, and low—with delay, 3-band PEQ, and compressor on each channel.
The following block diagram offers an overview of the 3-Way Processor.
Input
The 3-Way Processor control window features INPUT, OUTPUT, and control sections,
with DELAY, CROSS, EQ, and COMP pages selected by clicking the tabs along the top
of the control window, as shown below.
The INPUT and OUTPUT sections of the control window are displayed regardless of
which tab is clicked, and their parameters are explained in the following table.
Section Parameter
LEVEL
INPUT
MUTE
LEVEL
OUTPUT LOW MUTE
PHASE
LEVEL
OUTPUT MID MUTE
PHASE
LEVEL
OUTPUT HIGH MUTE
PHASE
The 3-Way Processor component features one input
and three outputs: High, Mid, and Low.
Delay HPF
Delay HPF LPF
Delay HPF LPF
Range
–Infinity dB to 0.0 dB Adjusts the input signal level
ON/OFF
–Infinity dB to 0.0 dB Adjusts the low output signal level
ON/OFF
NOR/REV
–Infinity dB to 0.0 dB Adjusts the mid output signal level
ON/OFF
NOR/REV
–Infinity dB to 0.0 dB Adjusts the high output signal level
ON/OFF
NOR/REV
Crossover Processor
3-band
Comp
PEQ
3-band
Comp
PEQ
3-band
Comp
PEQ
Description
Mutes the input
Mutes the low output
Inverts the low output signal
Mutes the mid output
Inverts the mid output signal
Mutes the high output
Inverts the high output signal
DME32—Owner's Manual
107
High
Output
Mid
Output
Low
Output