Printing - Yamaha DME32 Owner's Manual

Printing

The Print function allows you to print information about the current configuration,
including a diagram, component list, or parameter list. You can print information
about all components in the current configuration or selected components only.
To print information about the entire configuration, make sure that no com-
1
ponents are selected before choosing the Print command.
To print information about one or more components, select the components
2
before choosing the Print command.
All components can be selected by pressing CTRL+A.
Choose Print from the File menu.
3
The Print window appears, as shown below.
If you need to select and configure your printer, click Setup. The standard Windows
Printer Setup window appears. This window can also be opened by choosing Printer
Setup from the File menu. When you've configured your printer, click OK to save your
settings, or click Cancel to leave them unchanged. The Printer Setup window closes.
The name of the selected printer appears in the Print window, as shown above.
Set the Print parameters as required.
4
Section
All components
Range
Selected components
Diagram
Print Component list
Parameter list
To print to a file instead of a printer, select the Print to File check box.
5
Click OK to print, or click Cancel to cancel printing.
6
Printing starts. If you selected Print to File, the Save As window appears. Specify the file
name and folder where you want to save the print file, and then click OK, or click Can-
cel to cancel printing.
Parameter
This option is set according to what was selected
when the Print command was chosen and cannot
be changed here. If nothing was selected, Range is
set to "All components" and information about all
the components in the current configuration is
printed. If one or more components were selected,
it is set to "Selected components" and information
about the selected components is printed.
Prints the configuration diagram: all components
or selected components only
Prints a list of the selected components
Prints a list of the selected component's parameters
and their settings

Printing

Description
DME32—Owner's Manual
87