Assigning A Specific Function To Each Pedal Or Assignable Button - Yamaha Clavinova CVP-709 Reference Manual

Assigning a Specific Function to Each
Pedal or ASSIGNABLE button
Pedal
You can assign various functions to the three pedals of the instrument, instead of the original functions (damper,
sostenuto and soft). Likewise, various functions can be assigned to the Footswitch or Foot Controller connected to the
[AUX PEDAL] jack.
1
Select the function for each pedal.
For information about each function, refer to pages
NOTE
You can also assign other functions to the pedal — Punch In/Out of Song
35). If you assign multiple functions to the pedal, the priority is: Punch In/Out of Song  Registration Sequence 
(page
Functions assigned here.
2
Touch (Setting), then make the detailed settings of the selected functions.
For each Part, you can turn on or off the selected function and adjust the degree to which the selected function is
applied. Depending on the function selected in Step 1, the available parameters differ, or
indicating that there is no available parameters.
3
If necessary, set the polarity of the footswitch or foot controller connected to the [AUX
PEDAL] jack.
Depending on the Footswitch or Foot Controller, it may work in the opposite way (i.e., pressing it has no effect, but
releasing it does). If such a case occurs, use this setting to reverse the polarity.
4
If you change the functions of the Center and Left pedals from the default settings, turn
"Switch With Main Voice(Center & Left)" on or off as desired.
When this is set to off, the function assignments of the Center and Left pedals are maintained even if the Main Voice
is changed (page 45).
CVP-709/CVP-705 Reference Manual
1 2
39 – 40.
(page 83) and Registration Sequence
3
4
(Setting) is grayed out
38