Recalling Configurations; Recalling Configurations - Yamaha DME32 Owner's Manual

198
Chapter 10—Front Panel Operation
Recalling Configurations
Configurations can be recalled from the DME32 front panel as follows.
Note: When recalling a configuration, be aware that volume levels may change abruptly
as the system is reconfigured—nobody likes sudden loud noises, or worse, speaker damage.
Use the [UTILITY] button to select the "Recall Configuration" function.
1
The UTILITY indicator lights up.
Use the DATA wheel or [INC] and [DEC] buttons to select configuration A or B.
2
Only configuration memories that contain data can be selected.
Press the [VALUE] button to recall the configuration.
3
The configuration is recalled, the last recalled scene of that configuration is recalled,
and the message "Complete" appears on the display, as shown below.
Press the [UTILITY] button repeatedly until the UTILITY indicator goes out.
4
In a multiple-unit system, the selected configuration is recalled on all DME32s via the
cascade connections.
DME32—Owner's Manual
SCENE NO.
05
SCENE NO.
0 i
CONFIGURATION
CONFIGURATION
SCENE
SCENE