Run Mode Controller - Yamaha DME32 Owner's Manual

Run Mode Controller

The Run Mode Controller, which appears automatically when Run mode is selected, is
used to recall DME32 configurations and to store and recall scenes just like using the
DME32 front panel. It appears only when Run mode is selected and cannot be accessed
from the menus or elsewhere.
The layout of the Run Mode Controller depends on whether it's being used to control
configurations or scenes, and this is set by clicking the Scene/Config button.
Configuration Control
When configuration control is selected, the Run Mode Controller appears as shown
below.
A
Configuration number
This displays the number of the current configuration. When the other configuration
is selected, its number flashes until that configuration is recalled.
B
Edit indicator
This indicator is unavailable with configuration control.
C
Selector buttons
These buttons are used to select the configurations.
D
Scene/Config indicator
This indicates whether configuration control or scene control is selected.
E
Scene/Config button
This button toggles between configuration control and scene control.
F Configuration title
This section displays the title of the current configuration. When the other configura-
tion is selected, its title appears.
G
Recall button
This button is used to recall the selected configuration. If the selected configuration
memory contains no data, this button is unavailable.
2 3
1
4 5

Run Mode Controller

6 7
DME32—Owner's Manual
67