Recording To A Specific Track; Clearing A User Song - Yamaha PSR-I300 Owner's Manual

Recording Your Performance

Recording to a Specific Track

1
Make the desired settings, such as those
of Voice or Style.
If you want to record the melody performance,
turn ACMP off (page 25). If you want to record
Style playback, turn ACMP on (page 25).
2
While holding down the [REC] button,
press the desired Track button 1 or 2 to
engage the Record mode.
If you want to record Style playback, make sure to
select Track 2. If you want to record melody per-
formance, select either Track 1 or Track 2 as
desired. The illustration below is the example
when selecting Track 2.
The User Song appears on the display.
User 1
EC
The L (TRACK 1) and R (TRACK 2) indicators light
when the respective track contains data.
They are unlit when the respective track contains no
data.
Even if a track contains data, it is unlit when the track is
muted.
In addition, they flash when the respective track is
selected as a Recording target.
If Track 2 is selected as Recording target for
example and Track 1 contains already recorded
data, L flashes and R lights in the display. Turning
on or off R via the [REC TRACK 1] button will
determine whether you listen to a previously
recorded Track or not while recording a new
Track.
3
Press the [+/YES], [-/NO] buttons to
select the User Song you want to record.
4
Same as in Steps 3 to 5 (page 45) in
"Quick Recording."
46
PSR-I300 Owner's Manual
User Song
001
When playing back the recorded song, pressing
[REC TRACK 1] or [REC TRACK 2] button allows
you to mute Track 1 or Track 2. Each time the but-
ton is pressed, playback/mute is switched.
The L (TRACK 1) and R (TRACK 2)
indicators light when the respective
track contains data.
They are unlit when the respective track
is muted, even if the track contains data.

Clearing a User Song

1
Press the [SONG] button, and then
select the desired User Song by using
the Number buttons.
2
Press and hold the [REC] button for lon-
ger than a second.
A confirmation message appears.
YES ClrUser1
Hold for longer
than a second.
To cancel the operation, press the [-/NO] button.
3
Press the [+/YES] button.
A confirmation message appears again.
YES
Sure?
To cancel the operation, press the [-/NO] button.
4
Press the [+/YES] button to clear the
Song.
A "Writing!" message appears while the track is
being cleared.